Acramatic
Amada
Anilam
Bosch
Boss
DeltaDynaPath
Fagor
Fanuc
Heidenhain

Hinumerik
. . . 2000
. . . 2100
. . . 3000
. . . 3100
Hitachi
Mazak
Mitsubishi
Okuma
Sinumerik
Traub
Yasnac

CNC / DNC Settings for Hinumerik 2000M and 2000T

Parameter Value Comments  
 
5010 0 (00000000)
5012 0 (00000000)
     
5011 11000101 = 2400 For other Baud Rates see the table below
5013 11000101 = 2400 For other Baud Rates see the table below
    11000011 = 600
11000100 = 1200
11000101 = 2400
11000110 = 4800
5016 xx10xxxx x = do not change
RTS Line 1  
   

In the DNC software select RTS/CTS flow control

Cable shown here works with xOn/xOff (DC1/DC3) flow control and RTS/CTS (Hardware flow control so should work in most cases.

But if you're sure your CNC does not use any flow control - or requires only xOn/xOff then you may use the the simpler 3 wire cable. Diagram here.

RS232 Cable.
9pin computer to 25pin CNC

 

   

dnc software for acramatic DNC Software for Windows 8, Windows 7, Vista and Windows XP. 32 and 64bit versions
for Acramatic, Fanuc, Okuma, Sinumerik and many other ISO - ASCII CNC Controls.
Single or Multi-Tasking to Communicate with one or more than one control at the same time.
   

MiniMRP is an easy to use Inventory Manager with Multi-Level BOM Manager and other 'MRP'
features usually only available in larger MRP/ERP packages.

Inventory, Single and Multi-Level BOM for less that $200